BIS certification is mandatory for electric can openers in India. The requirement comes from the Safety of Household, Commercial and Similar Electrical Appliances (Quality Control) Order, 2026 (S.O. 1739(E), dated 6 April 2026), which lists Electric Can Openers in its Table. The Order comes into force on 1 October 2026 for large and medium enterprises, 1 January 2027 for small enterprises, and 1 April 2027 for micro enterprises. Electric can openers must conform to IS 302 (Part 1):2024 and the particular requirements in IS 302 (Part 2/Sec 14):2009, titled Electric Kitchen Machines, which also covers appliances such as blenders, juicers and bean slicers. Each unit must carry the ISI Mark under Scheme-I of the BIS (Conformity Assessment) Regulations, 2018. Products manufactured in India solely for export are exempt. Foreign manufacturers apply through the Foreign Manufacturers Certification Scheme (FMCS). Non-compliance is punishable under the BIS Act, 2016.
An electric can opener uses a small motor to drive a cutting wheel around the rim of a can. That combination of a rotating blade, a motor and mains or battery power close to the user's hand is exactly what safety standards are written to control.
The 2026 Quality Control Order for household and similar electrical appliances makes BIS certification compulsory for electric can openers. Manufacturers need a BIS licence and the ISI Mark. Importers and brand owners must source only from BIS-licensed manufacturers. This guide explains what the Order requires, which standards apply, what testing involves and how to plan your certification.
📑 Quick Navigation
- Is BIS Certification Mandatory for Electric Can Openers?
- Applicable Standard: IS 302 (Part 1):2024 and IS 302 (Part 2/Sec 14)
- QCO 2026 Implementation Dates
- Mandatory Tests for Electric Can Openers
- BIS Certification Process — Step by Step
- Indian Manufacturers vs Foreign Manufacturers (FMCS)
- Documents Required
- BIS Compliance Checklist
- Timeline and Cost Factors
- Exemptions and Relaxations
- Common Certification Mistakes
- Penalty for Selling Without the ISI Mark
- Benefits of BIS Certification
- Official Regulatory References
- How Rego Services Supports Your Certification
- Frequently Asked Questions
Is BIS Certification Mandatory for Electric Can Openers?
What Is BIS Certification for Electric Can Openers?
BIS certification is the licence and ISI Mark that the Bureau of Indian Standards grants once an electric-can-opener model has been tested and found to conform to IS 302 (Part 1):2024 and the applicable particular requirements. It is the mechanism through which the 2026 Quality Control Order is enforced for this product category.
Yes. The Ministry of Commerce and Industry notified the Order on 6 April 2026. It supersedes the 2025 Order and covers 90 appliance categories, including electric can openers. Once the Order applies to you, an electric can opener cannot lawfully be manufactured, imported, distributed or sold. It must conform to the notified standard and bear the ISI Mark.
You can read the Order's scope and Table on the Department for Promotion of Industry and Internal Trade website. Licence and standards information is published by the Bureau of Indian Standards.
| Particulars | Details |
|---|---|
| Regulation | Safety of Household, Commercial and Similar Electrical Appliances (Quality Control) Order, 2026 |
| Notification | S.O. 1739(E), dated 6 April 2026 (supersedes the 2025 Order, S.O. 2232(E)) |
| Product Entry | Electric Can Openers, listed in the Order's Table (verify the exact Sl. No. against the official notification) |
| Indian Standard | IS 302 (Part 1):2024, with IS 302 (Part 2/Sec 14):2009 (First Revision) for the particular requirements for electric kitchen machines, including can openers |
| Certification Route | ISI Mark licence under Scheme-I, Schedule-II, BIS (Conformity Assessment) Regulations, 2018 |
| Voltage Coverage | Not exceeding 250 V, as set out in IS 302 (Part 2/Sec 14) |
| Enforcement | Bureau of Indian Standards; penalties under the BIS Act, 2016 |
Applicable Standard: IS 302 (Part 1):2024 and IS 302 (Part 2/Sec 14)
India's household electrical safety standard is the IS 302 series. Two documents work together for electric can openers. A general part applies to every household appliance. A particular part, shared across a group of small kitchen appliances, adds the requirements written for electric kitchen machines.
Because IS 302 (Part 2/Sec 14) is a shared standard for a group of small kitchen appliances, a multi-function machine that also blends, juices or grinds is still assessed under the same standard, but every function and accessory needs to be covered in the test plan and the model description. Confirm the exact model configuration before you apply.
Products Typically Assessed Alongside Electric Can Openers
Countertop or handheld units with a motor-driven cutting wheel, used only for opening cans.
Units that combine a can opener with a knife sharpener or other kitchen function, assessed under the same electric-kitchen-machines standard.
Cordless units within the standard's voltage and construction scope, with attention to the battery and charger where fitted.
Units used by laymen outside the household, such as in small catering setups, also fall within the standard's scope.
QCO 2026 Implementation Dates
The Order applies different start dates by enterprise size, as defined under the Micro, Small and Medium Enterprises Development Act, 2006.
The Order applies to both domestic manufacturers and importers. Goods manufactured in India purely for export are outside its scope.
Mandatory Tests for Electric Can Openers
Samples are tested at a BIS-recognised laboratory against IS 302 (Part 1):2024 and the particular requirements for electric kitchen machines. The exact test plan depends on the edition in force and your model's construction. Testing generally falls into these groups:
Marking and instructions are reviewed alongside these tests. The rating label, ISI Mark and user instructions must be durable and legible.
BIS Certification Process — Step by Step
The process below follows Scheme-I. Each step builds on the last. Delays usually come from incomplete documents or samples that fail in the laboratory.
Confirm that your product is an electric can opener within the scope of IS 302 (Part 1):2024 and IS 302 (Part 2/Sec 14), and identify which implementation date applies to your enterprise.
Group models by rating and construction. Freeze the list of critical components — motor, cutting mechanism, switch and power cord — before testing begins.
Compile factory, quality-control, product and authorisation documents. Foreign manufacturers must also appoint an Authorised Indian Representative.
Submit the Scheme-I application with fees and supporting documents on the BIS online portal. BIS scrutinises the file and may raise queries.
A BIS officer inspects the manufacturing process, in-house testing facilities and quality system. The officer also draws samples from your production.
Samples are tested against IS 302 (Part 1):2024 and the particular requirements. A failed test means corrective action and retesting, so pre-compliance checks save time.
BIS reviews the inspection findings and test reports. When every requirement is met, the licence is granted with a CM/L number for the certified models.
Mark every certified unit with the ISI Mark and licence number. Then comply with periodic surveillance, marking fees and renewal to keep the licence valid.
Indian Manufacturers vs Foreign Manufacturers (FMCS)
The standard and the tests are the same for everyone. What differs is how the licence is applied for, how the factory is inspected, and who holds accountability in India.
Manufacturer vs Importer: Who Is Responsible?
| Business | Typical BIS Responsibility |
|---|---|
| Indian manufacturer | Apply for the Scheme-I BIS licence covering each certified model |
| Foreign manufacturer | Apply through the FMCS route and appoint an Authorised Indian Representative |
| Importer | Verify that the overseas supplier holds a valid BIS licence covering the exact model being imported |
| Brand owner | Confirm that the licence, model list and brand authorisation are all in order before the product is sold under the brand |
| Export-only manufacturer | Check that the goods fall within the Order's export exemption before relying on it |
- Licence is held by the Indian manufacturer
- BIS inspects the factory in India
- Samples tested at a BIS-recognised laboratory
- Shorter overall timeline
- Small and micro enterprises get later start dates
- Licence is held by the foreign manufacturer
- An Authorised Indian Representative is appointed
- BIS inspects the overseas factory
- Longer timeline because of inspection scheduling
- Importers must buy from BIS-licensed manufacturers
A BIS licence is granted to the manufacturer, not the importer. Before placing an order, verify that your overseas supplier holds a valid licence covering the exact model you plan to import.
Documents Required
Missing or inconsistent documents are the most common reason applications stall. Prepare the following before filing:
- Business documents — company registration or Udyam certificate, GST registration, and proof of the manufacturing premises.
- Authorised signatory — board resolution or authorisation letter with identity proof. Foreign manufacturers also submit the Authorised Indian Representative appointment.
- Factory details — layout plan, manufacturing process flow chart, and list of plant, machinery and production equipment.
- Testing and quality control — list of in-house test equipment with calibration certificates, and the quality-control plan.
- Product documents — model list, technical specifications, rating label, circuit diagram, bill of materials and critical component list.
- Brand authorisation — trademark or brand-owner authorisation where the brand differs from the manufacturer.
- Test reports — reports from a BIS-recognised laboratory, as applicable to your route.
- Declarations and undertakings — BIS-format declarations signed by the authorised signatory.
Electric Can Opener BIS Compliance Checklist
Use this checklist alongside the document list above when preparing your application.
- Product classification — confirmed as an electric can opener under the Order's Table (verify the exact Sl. No. against the official notification).
- Applicable IS 302 parts — Part 1:2024 and the Part 2 particular requirements, editions confirmed with the laboratory.
- Enterprise category — large/medium, small, or micro, as defined under the MSMED Act, 2006.
- Model list — every model and variant to be covered by the licence.
- Rated voltage and power — recorded for each model.
- Bill of materials — finalised and frozen before sample testing.
- Critical components — motor, cutting mechanism, switch, power cord and, for cordless models, the battery and charger identified and documented.
- Rating label — content and placement checked against the standard.
- Circuit diagram — prepared for each model or model group.
- Factory documents — layout plan, process flow chart and equipment list ready.
- Quality-control documents — quality-control plan prepared and in use.
- In-house testing equipment — listed, with calibration certificates current.
- Test samples — identified and available for the laboratory and factory inspection.
- Brand authorisation — obtained where the brand differs from the manufacturer.
- BIS application documents — complete Scheme-I file assembled before filing.
Timeline and Cost Factors
The figures below are indicative. Your actual timeline depends on document readiness, the number of models, laboratory availability and inspection scheduling.
| Stage | Indian Manufacturer | Foreign Manufacturer (FMCS) |
|---|---|---|
| Documents and application filing | 1–2 weeks | 2–3 weeks |
| Factory inspection and sample drawing | 2–4 weeks | 6–10 weeks |
| Laboratory testing and report | 3–6 weeks | 4–8 weeks |
| Review and licence grant | 1–2 weeks | 2–4 weeks |
| Indicative total | 45–90 days | 4–6 months |
| Cost Component | What Drives It |
|---|---|
| BIS application and licence fees | Scheme, number of models and product groups |
| Laboratory testing charges | Number of samples, models and the extent of the test plan |
| Factory inspection charges | Location of the factory and number of inspection visits |
| Annual marking fee | Production or sales volume of certified products |
| Consultancy and documentation | Scope of support, from document preparation to full licence management |
Exemptions and Relaxations
The Order includes several carve-outs. Use them only after confirming that your situation fits the wording precisely.
The Order does not apply to goods manufactured domestically for export. Products sold in India remain fully covered.
Manufacturers of household appliances may import up to 200 units a year for research and development. These units cannot be sold, may be disposed of as scrap, and must be recorded year-wise.
A manufacturer who is BIS-certified or has applied for certification may sell, display or offer declared stock. This is allowed for up to six months from the implementation date, subject to a declaration to BIS.
Small enterprises comply from 1 January 2027 and micro enterprises from 1 April 2027. Smaller manufacturers get additional time to prepare.
Common BIS Certification Mistakes for Electric Can Openers
Testing a multi-function kitchen machine only for its can-opener function, without covering every function and accessory in the test plan and model description.
The Order requires the latest version of the Indian Standard. Confirm the current edition with your laboratory before testing.
Changing the motor or cutting mechanism after samples are tested, or after the licence is granted, can require prior intimation to BIS and retesting.
Rating-label content and placement are reviewed as part of certification. Check the label against the standard before submission.
Incomplete details on the motor, cutting mechanism or, for cordless models, the battery slow down both testing and BIS review.
Missing layout plans, process flow charts or equipment lists are a common reason factory inspections are delayed.
Grouping models incorrectly by rating or construction can mean some variants are left outside the tested and certified scope.
A BIS licence is granted to the manufacturer, not the importer. Importers must separately verify that the exact model they import is covered.
Foreign manufacturers who skip the Authorised Indian Representative appointment or overseas inspection step delay their own application.
Laboratory queues and inspection scheduling near the deadline are common. Filing early also helps protect existing stock under the Order's clearance provision.
Penalty for Selling Without the ISI Mark
Once the Order applies to you, electric can openers without a valid BIS licence and ISI Mark cannot be lawfully placed on the Indian market. Contravention is punishable under the Bureau of Indian Standards Act, 2016. Consequences can include fines, imprisonment and seizure of non-conforming goods. Imported consignments without a valid licence and marking also risk being held at customs.
Benefits of BIS Certification
Official Regulatory References
- Bureau of Indian Standards (BIS) — certifying and enforcing authority; standards, Scheme-I and FMCS information. bis.gov.in
- Department for Promotion of Industry and Internal Trade (DPIIT) — issuing authority for the Quality Control Order. dpiit.gov.in
- Notification S.O. 1739(E), dated 6 April 2026 — the Safety of Household, Commercial and Similar Electrical Appliances (Quality Control) Order, 2026, published in the Gazette of India.
BIS Certification Services in India
Explore Rego Services' full range of BIS ISI Mark, FMCS and CRS certification support for manufacturers, importers and foreign brands.
BIS Certification for Electric Water Boilers in India
Another kitchen appliance under the same Order. See the applicable IS 302 particular-requirements standard and the certification process for electric water boilers.
BIS Certification for Electric Coffee Makers in India
Selling other kitchen electrical appliances too? See how the same QCO 2026 applies to electric coffee makers at Sl. No. 16.
How Rego Services Supports Your Certification
Rego Services Private Limited manages BIS certification for electric can openers and other electrical appliances, from the first applicability check to the granted licence.
- Applicability and dates — We confirm your product's entry in the QCO, the standard editions in force and the date that applies to your enterprise.
- Gap analysis — We review your design, critical components and existing test reports against IS 302 (Part 1):2024 and the particular requirements.
- Documentation — We prepare the complete Scheme-I application file, including factory and quality-control documents.
- Testing coordination — We arrange sample submission and testing at BIS-recognised laboratories.
- Inspection support — We prepare your team and facility for the BIS factory inspection, in India or overseas.
- ISI Mark and FMCS management — We handle the process end-to-end, including Authorised Indian Representative services for foreign manufacturers.
Frequently Asked Questions
Is BIS certification mandatory for electric can openers in India?
Yes. Electric Can Openers are covered by the Safety of Household, Commercial and Similar Electrical Appliances (Quality Control) Order, 2026 (S.O. 1739(E), dated 6 April 2026). They must conform to IS 302 (Part 1):2024 and the applicable particular requirements, and bear the ISI Mark under a BIS licence. Confirm the exact serial-number entry for your model with BIS or the latest official notification.
From which date is BIS certification compulsory for electric can openers?
1 October 2026 for large and medium enterprises, 1 January 2027 for small enterprises, and 1 April 2027 for micro enterprises, as defined under the MSMED Act, 2006.
Which Indian Standard applies to electric can openers?
IS 302 (Part 1):2024 sets the general safety requirements named in the Order. Electric can openers fall under the particular requirements in IS 302 (Part 2/Sec 14):2009, titled Electric Kitchen Machines, which covers a broad group of small household electric kitchen appliances. The Order states that the latest version of the Indian Standard applies.
What other appliances share the same standard as electric can openers?
IS 302 (Part 2/Sec 14) covers electric kitchen machines generally, and its scope lists examples including bean slicers, berry-juice extractors, blenders, can openers, centrifugal juicers, churns and citrus-fruit squeezers, among others, all rated up to 250 V.
Do electric can openers made in India only for export need BIS certification?
No. The Order does not apply to goods manufactured domestically for export.
Can a foreign manufacturer apply for BIS certification for electric can openers?
Yes. Foreign manufacturers apply under the BIS Foreign Manufacturers Certification Scheme (FMCS). They appoint an Authorised Indian Representative. BIS inspects the overseas factory.
How long does BIS certification for electric can openers take?
Indicatively, 45 to 90 days for Indian manufacturers and 4 to 6 months for foreign manufacturers. The timeline depends on documentation, laboratory slots, the number of models and factory inspection scheduling.
What happens if electric can openers are sold without the ISI Mark?
Non-compliance is punishable under the Bureau of Indian Standards Act, 2016. This can lead to fines, imprisonment and seizure of non-conforming goods.
✓ Key Takeaways
- BIS certification is mandatory for electric can openers under the QCO 2026 (S.O. 1739(E), 6 April 2026)
- Verify the exact Sl. No. entry for your product against the official Gazette notification before relying on it
- Dates: 1 October 2026 (large and medium), 1 January 2027 (small), 1 April 2027 (micro)
- Standard: IS 302 (Part 1):2024, with IS 302 (Part 2/Sec 14):2009 (Electric Kitchen Machines) for can openers
- The same standard also covers bean slicers, juicers, blenders and similar small kitchen appliances
- Certification route: Scheme-I ISI Mark licence; foreign manufacturers apply through FMCS
- The 19 March 2026 date quoted in older articles belongs to the superseded 2025 Order
- Export-only manufacturing is exempt; declared pre-implementation stock can be sold for six months if you are certified or have applied
- Rego Services provides end-to-end support — applicability checks, gap analysis, testing coordination and licence management
Reviewed by the Rego Services Compliance Team | Last Updated: September 2026 | Applicable QCO: S.O. 1739(E), dated 6 April 2026 | Applicable Standard: IS 302 (Part 1):2024, IS 302 (Part 2/Sec 14):2009
Your Next Step
The first implementation date is 1 October 2026, so manufacturers and importers of electric can openers should not wait to begin. Testing slots, factory inspections and document preparation all take time. An early application can also protect your existing stock under the Order's clearance provision.
Rego Services' regulatory team can confirm your applicability, prepare a complete application and manage your BIS licence from filing to grant.
Contact Rego Services today for expert guidance on BIS certification for electric can openers and the ISI Mark process.